To wash vertical blinds or louvre curtains, it is necessary to carefully open the curtains, then wash them with the appropriate method and install them again carefully. Eid is near and washing the curtains is one of the main elements of the work of the house. Since the variety of curtains is large and each one has its own type and model, washing each one requires its own method. In this article, we want to introduce you to the correct way to wash vertical blinds. Vertical shutter curtain or lordrape
shutter curtain used to be mostly used in offices, but nowadays it is also widely used to cover windows in homes due to its variety in material, design and shapes. Today's vertical blinds are made of solid, banner, and mesh materials, and they are designed with landscape patterns, flowers, and cartoon patterns for children's rooms. The first method of washing the vertical blind
To clean the Lourdrape curtain, first slowly separate the lower chains of the curtain strips from the weights and then pull the curtain weights out from inside the strips and put them all in a pan and Clean with a suitable detergent. To separate the Lorraine curtain strips from the upper hooks, pull each of the strips slightly upwards and remove them from the hook. After opening all the strips, you can also open and wash the curtain rail by loosening the front screws of the curtain clips that connect the rail to the ceiling or wall. To wash Lourdrape curtain strips, you can spread them on a flat surface and clean them completely with the help of shampoo or mild detergent and a plastic brush or any other soft brush. After rinsing the strips, roll them up and let them dry. Otherwise, the strips will not be completely smooth after drying and will need to be ironed. Of course, by leveling the strips, the drying process will be very slow and time-consuming. To dry the strips faster, you can hang them and iron them after they are completely dry. In this case, the temperature of the iron should not be high because it can damage the curtain strip.
Washing vertical blinds, washing vertical blinds, washing Lourdrape blinds, the second method of washing vertical blinds
Open the blinds, stack them and roll them. Place the tube in a large container. Fill the container with warm water and put some washing machine powder in it. Let it stay overnight. Black water will collect. If you want, you can change the water and repeat this process. Then install the curtains wet and adjust the thread.
Reinstalling the curtain after washing the vertical shutter
First, place the curtain rail inside the clips and tighten the front screws completely. After the strips are completely dry, hang them by the upper hook of the curtain rail and place the lower weights inside the lower edges of the strips. At the end of the lower chain, put the strips from one side (the beginning or the end strip) respectively in the hooks of the weights.
Remarkable points in washing vertical blinds
Usually, washing the curtain rails, weights and chains does not require special consideration, only care should be taken that the chains or hooks are not broken during washing. Its plastic is unbreakable. Shutter curtains should not be moved too much or separated from their original blade because in this case they will lose their original efficiency and beauty. Some types of old Lorraine curtains have thin galvanized hooks that can be damaged by pulling and bending them too much. Be careful not to use coarse brushes when washing the curtains, because these brushes can lead to the thread being scratched or the stitching of the designs on the Lorrape curtain strip being lost. Pay attention not to miss a strip when placing the chain at the bottom of the curtain, in which case it is necessary to release the rest of the hooks and connect the desired strip chain as well.
